Multi-Bars for Assisted Dips (MBAR)

One frame, 3 bar heights: multi bars set low crossbars at 3 ft, 4 ft and 5 ft off the ground, so a mixed group can share a single unit for assisted dips, push-ups, reverse pull-ups and stretching. Users get wide, narrow and neutral grips, which target the chest, shoulders, back and arms and also support stretching exercises that improve mobility. TriActive USA builds it like our Tri-Level Horizontal Bar, with the crossbars set much lower to the ground. It is rated for users weighing up to 330 lb.

The unit has 4 upright posts and 3 crossbars, 7 parts in total. A slip fit tube is welded inside each crossbar, and 3/8 in. bolts hold the crossbars in place. A 6 to 8 mil powder coat, tested for 1,000 hours of salt spray resistance, protects the steel. A 10-year limited warranty covers non-moving parts, and the unit comes in green or blue. It is 177 in. long, so plan the site for that length. Multi-bars are typically installed in parks, on school campuses and in correctional yards. A parks department laying out park exercise equipment can use it for users who need assisted movements before they move to full pull-ups and dips.

Specifications

ACTUAL EQUIPMENT MAY LOOK DIFFERENT THAN SHOWN DUE TO FREQUENT DESIGN UPGRADES. THIS EQUIPMENT IS DESIGNED FOR POWD INDIVIDUALS WEIGHING UP TO 330 LBS.

Color

GREEN OR BLUE

Dimensions

177”L X 8”W X 88”H

Weight

110 LBS

Features

Product Specification

TriActive USA’s MBAR assumes three cross bars (3, 4, and 5 feet off ground on center) and four upright posts utilizing a slip fit tube that’s welded inside the cross bars and drilling holes for 3/8” bolts to secure the cross bars in place. MBAR assumes usage of American standard size tubing, namely 3” x 3” square tubing x 11ga, 1-1/4” OD round tubing x 11ga, 1.5” Round Tube 11ga and ¼” hot rolled flat bar. The part will have seven parts in total – 4 uprights and 3 cross bars. TriActive USA Fitness Equipment does not include any of the following: exposed cables, hydraulics or plastic seating.

Powder Coating Specification

Powder coating thickness 6-8 mils. Coatings are tested for 1000 hours of salt spray resistance. Pretreated, iron phosphate applied, zinc powder applied, functional powder applied, and final TGIC powder coat is applied to provide outstanding weathering capabilities.

Gallery

Contact Us

New Home Contact Form